Server Fault works best with JavaScript enabled. I accept the terms in the license agreement. If you do not wish to so agree, do not install or use the Software. Email Required, but never shown. Whilst the drive caddies were fully inserted and clicked into place, they weren’t providing the drives with power.

Uploader: Tojas
Date Added: 15 October 2010
File Size: 16.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 46886
Price: Free* [*Free Regsitration Required]

You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions: I would make sure you have a backup of your G RAID1 then try to go into the bios utils to megaraiv if those drives are seen and try to set up the second raid in there. Please submit your comments, questions, or suggestions here.

I don’t know if it’s applicable but I did find this similar problem on IBM site: No rights or licenses are granted by Intel to You, expressly or by implication, with respect to any proprietary information or patent, copyright, mask work, trademark, trade secret, or other intellectual property right owned or controlled by Intel, except as expressly provided in this Agreement. Such license agreement may be a “break-the- seal” license agreement.

You may not reverse engineer, decompile, or disassemble the Software. Your personal information will be used to respond to this inquiry only. You may not export the Software in violation of applicable export laws and regulations. What steps do I need to go through in order to get the controller to detect the two new drives that I know are plugged in?

Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. I’ve made some dodgy modifications to the caddies so they will fit correctly and provide power, as a fix for the short term.

  3C910 A01 DRIVER

If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

Your comments have been sent. You may only distribute the Software to your customers megarai to a written license agreement.

Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. I tested by taking the drive out of the caddy and inserting it without a caddy into the saw. Do not use or load this software and any associated materials collectively, the “Software” until you have carefully read the following terms and conditions.

IT mode for 4 ports Controller Raid SAS/SATA LSI-SASE / HP-SASE-R | FreeNAS Community

It powered on with no problems and was detected almost immediately. By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service. The Software megataid copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

SAS RAID 0/1 controller (based on LSI 1064e)

I thought it might be that the drive wasn’t fully inserted or something similar, so Sax pulled that drive out and reinserted it. You may not remove any copyright notices from the Software. By loading or using the Software, you agree to the terms of this Agreement. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other lsj property rights.


You may copy the Software onto your organization’s computers for your organization’s use, and you may make a reasonable number of back-up copies of the Software, subject to these conditions: The associated open source licenses are included with the driver package. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.

Upon starting it up and opening the MegaRAID Storage Manager which is the latest version from the IBM site for this server model I can see my existing array, as well as one of the new sli drives but not the second one.

SAS 1064e Driver for Windows*

This didn’t help, so I took both of the unconfigured drives out and swapped their positions the drive that was in bay 3 is now in bay 4, and vice versa. Megaradi you do not wish to so agree, do not install or use the Software. Post as a guest Name.

Your name and email address will not be added to any mailing list, and you will not receive email from Intel Corporation unless requested. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and megarxid agree to prevent unauthorized copying of the Software.